Publicidad
OBJ_BUCH-2617-001.book Page 12 Thursday, August 6, 2015 9:55 AM
Technical Data
Orbital sander
Art. No.
Rated power input
No-load speed
min
No-load orbital stroke
rate
min
Orbit diameter
Sanding sheet dimen-
sions
— Adhesion via Velcro
backing
— Attachment via
clamping
Sanding plate dimen-
sions
Weight according to
EPTA-Procedure
01:2014
Protection class
The values given are valid for a nominal voltage [U] of
230 V. For different voltages and models for specific coun-
tries, these values can vary.
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-4.
Typically the A-weighted sound pressure level of
the product is 76 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed
80 dB(A).
Wear hearing protection!
Vibration total values a
(triax vector sum) and un-
h
certainty K determined according to EN 60745-2-4:
2
2
a
=4.5 m/s
, K=1.5 m/s
.
h
The vibration level given in this information sheet
has been measured in accordance with a standard-
ised test given in EN 60745 and may be used to
compare one tool with another. It may be used for
a preliminary assessment of exposure.
The declared vibration emission level represents
the main applications of the tool. However if the
tool is used for different applications, with different
accessories or insertion tools or is poorly main-
tained, the vibration emission may differ. This may
significantly increase the exposure level over the
total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the
tool is switched off or when it is running but not ac-
tually doing the job. This may significantly reduce
the exposure level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as:
maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
12 | English
Declaration of Conformity
We declare under our sole responsibility that the
BOS-280
product described under "Technical Data" is in
102517
conformity with all relevant provisions of the direc-
W
330
tives 2011/65/EU, until 19 April 2016:
-1
5500 – 11000
2004/108/EC, from 20 April 2016 on:
2014/30/EU, 2006/42/EC including their amend-
-1
11000 – 22000
ments and complies with the following standards:
mm
2.4
EN 60745-1, EN 60745-2-4.
Technical file (2006/42/EC) at:
Berner Trading Holding GmbH
Bernerstraße 6
mm
115 x 230
74653 Künzelsau
GERMANY
mm
115 x 280
Armin Hess
Chairman of the Managemant Board
mm
114 x 226
kg
2.6
/II
03.08.2015, Berner Trading Holding GmbH
Bernerstraße 6
74653 Künzelsau
GERMANY
Assembly
Before any work on the machine itself, pull the
Dust/Chip Extraction
Dust from materials such as lead-containing
Prevent dust accumulation at the workplace.
mains plug.
coatings, some wood types, minerals and metal
can be harmful to one's health. Touching or
breathing-in the dust can cause allergic reac-
tions and/or lead to respiratory infections of the
user or bystanders.
Certain dust, such as oak or beech dust, is con-
sidered carcinogenic, especially in connection
with wood-treatment additives (chromate, wood
preservative). Materials containing asbestos may
only be worked by specialists.
– As far as possible, use a dust extraction sys-
tem suitable for the material.
– Provide for good ventilation of the working
place.
– It is recommended to wear a P2 filter-class res-
pirator.
Observe the relevant regulations in your country
for the materials to be worked.
Dust can easily ignite.
1 609 92A 1D6 • 6.8.15
Publicidad
