Fields Of Application And Working Methods - Berner BHPC 150-1 Manual De Instrucciones

5 Fields of application and working
methods
5.1 General
5.1.1 Detergent and foam
5.1.2 Mechanical effect
Original Instructions
128303560_BHPC_150-1.indb 27 128303560_BHPC_150-1.indb 27
Effi cient high presure cleaning is achieved by following a few guide-
lines, combined with your own personal experience of specifi c
cleaning tasks. Accessories and detergents, when correctly cho-
sen, can increase the effi ciency of your pressure washer. Here is
some basic information about cleaning.
Foam or detergent should be applied onto dry surfaces so that the
chemical product is in direct contact with the dirt. Detergents are
applied from bottom to top, for example on a car bodywork, in order
to avoid "super clean" areas, where the detergent collects in higher
concentration and streams downwards. Let the detergent work for
several minutes before rinsing but never let it dry on the surface be-
ing cleaned. Note: It is important that the detergents do not dry up.
Otherwise the surfac that has to be cleaned can be da maged.
In order to break down tough layers of dirt, additional mechanical
effect may be required. Special wash brushes offer this supplemen-
tary effect that cuts through dirt (especially by car washing).
BHPC 150-1
DE
EN
FR
IT
ES
27
25-02-2011 10:34:39 25-02-2011 10:34:39