Publicidad
Idiomas disponibles
Idiomas disponibles
Instructions
Adjustable suspension system
By turning the selector 8, a „hard" or „soft" position can be selected for
suspension.
Hood and safety bar
By pressing the bayonet joint 12, the hood or the safety bar can be
pulled out. When inserting it, make sure the safety bar locks into place
correctly and be careful not to pinch any of the fabric parts. By pressing
the buttons, the safety bar position can be changed.
WARNING!
The hood bar 10 of the stroller and the safety bar are
not suitable for carrying the pram.
WARNING!
Safety belt
Secure your child with the five-point harness system 14.
Make sure the shoulder straps D are plugged in and that the belt is
securely fastened. The length of the belt can be adjusted with sliding
buckle F, the length of the crotch strap G can be adjusted with quick-
release slider H.
To undo the harness: press the two tongues B together using your
thumb and forefinger, then press the red button A, so that you can pull
the two plugs E out upwards. To undo the shoulder straps you then
press button C.
Adjusting the footrest
By pressing the two red safety buttons 15 at the same time, the footrest
can be lowered. When lifting it, adjustment of positions is effected auto-
matically.
Automatic locking of the upper section
Place the seat frame on the chassis so that the two upper fastening
components rest on the locking bolts provided for this purpose. Both
sides of the lock mechanism 19 will automatically close when you press
the seat frame down.
WARNING!
Ensure that the seat frame is securely in place
before use!
To release the lock mechanism, press the safety button to the right of
the release button on the back of the inclining seat frame and then press
the release button until the release is activated.
Grasp the hoop guard with your other hand to remove the seat frame.
10
F
14
C
A
G
B
H
D
E
F
Publicidad
