About the refrigerator doors.
When the door is only partially open,
it will automatically close.
Beyond this stop the door will stay
open.
7/16" Wrench
Raise
12
Refrigerator Doors
The refrigerator doors may feel different than
the ones you are used to. The special door
opening/closing feature makes sure the doors
close all the way and are securely sealed.
When opening and closing the door, you will
notice a stop position. If the door is opened
past this stop point, the door will remain open
to allow you to load and unload food more
easily. When the door is only partially open, it
will automatically close.
Door Alignment
If doors are uneven, adjust the refrigerator
door.
Using a 7/16" wrench, turn the door
adjusting screw to the right to raise the
door, to the left to lower it. (A nylon plug,
imbedded in the threads of the pin,
prevents the pin from turning unless a
wrench is used.)
The resistance you feel at the stop position will
be reduced as the door is loaded with food.
After one or two turns of the wrench,
open and close the refrigerator door and
check the alignment at the top of the
doors.