cecotec BIGDRY 9000 PROFESSIONAL Manual De Instrucciones página 20

ENGLISH
A. Power
B. Timer
C. Humidity settings
D. Modes
E. Fan speed
Power
The device will beep when it is turned on, and the LED will display the room humidity level for
3 seconds. Then, the display will turn automatically off.
Press the power button once to start operation. Press it again to stop operation.
Lock
Press the power button for 3-5 seconds to activate the child lock system. Press and hold it
again for 3-5 seconds to deactivate it.
Fan
Press the fan button to activate the fan function. Press the same button to select between
high or low speed. The fan indicator will light up.
The fan speed can be adjusted under dry mode. When humidity level is 55 % or over, the speed
will automatically operate at high speed.
When humidity level is under 50 %, the fan will automatically operate at low speed.
When humidity level is 50-55 %, then fan speed will switch between high/low speed
automatically.
Sleep mode
Hold down the fan button to activate the sleep mode: The fan will switch to low speed and the
sleep mode indicator will light up on the display after 10 seconds.
This mode can only be set under the dehumidifying mode.
In sleep mode, humidity level can be set between 55-60-65 %.
Humidity settings
1. Press the settings button to adjust humidity level.
2. The default humidity in dehumidifying mode is 40 %.
3. Press the settings button to adjust humidity from 40 % to 80 %, in 5-% interval. The display
will show the selected setting.
4. The device will automatically stop operating when the room humidity is -2 %, and will start
operating again automatically after 3 minutes.
5. If after 3 minutes, the room humidity level is still below the set one, the device will
automatically turn off.
20
BIGDRY 9000 PROFESSIONAL / PROFESSIONAL BLACK
05608_05609_BigDry 9000 Professional / Professional Black_Manual_YV01200129.indd 20 05608_05609_BigDry 9000 Professional / Professional Black_Manual_YV01200129.indd 20 29/1/20 18:14 29/1/20 18:14