Personal Safety; Transporting; Air Compressor And Pneumatic Tool Safety - Husky C301H Guía De Uso Y Cuidado

Safety Information (continued)
equipment has not been examined and
no implication of proper use for
breathing air is intended or implied.

PERSONAL SAFETY

WARNING: Operating any
power tool can result in foreign
objects being thrown into your
eyes, which can result in severe
eye damage. Before beginning
operation, always wear safety
goggles, safety glasses with
side shields, or a full face shield
when needed. Always use eye
protection marked to comply
with ANSI Z87.1.
WARNING: This product
contains chemicals known to
the State of California to cause
cancer and birth defects or other
reproductive harm. Wash hands
after handling.
1.
shields when operating power tools.
Dust mask, nonskid safety shoes, hard
hat, or hearing protection must be used
for appropriate conditions.
2. Stay alert when operating a
power tool. Do not use the tool
while tired or under the
in uence of drugs, alcohol, or medication.
3.
your hair, clothing, and gloves away
from moving parts. Loose clothes,
jewelry, or long hair can be caught in
moving parts.
4. Keep proper footing and balance at
all times. Proper footing and balance
enables better control of the tool in
unexpected situations
5. Do not use on a ladder or unstable support.
6. Never touch any exposed metal
parts on compressor during or
immediately after operation.
Use safety equipment.
Always wear eye
protection with side
Do not wear loose
clothing or jewelry.
Contain long hair. Keep
Compressor will remain hot for several
minutes after operation. Do not reach
around protective shrouds or attempt
maintenance until unit has been
allowed to cool.
8. The compressor is too heavy to be
lifted by one person. Obtain
assistance from others before lifting.

TRANSPORTING

1. Always place compressor on a
protective mat when
transporting to protect against
damage to vehicle from leaks. Remove
compressor from vehicle immediately
upon arrival at your destination.
2. Always transport and store unit in an
upright position.
AIR COMPRESSOR AND
PNEUMATIC TOOL SAFETY
WARNING: Do not attempt
to modify this tool or create
accessories not recommended
for use with this tool. Any such
alteration or modi cation is
misuse and could result in a
hazardous condition leading to
possible serious personal injury.
CAUTION: Do not use in an
environment that is dusty or
otherwise contaminated. Using
the air compressor in this type of
environment may cause damage
to the unit.
1. Keep compressors as far from the
spraying area as possible, at least 15 ft.
(0.4 m) from the spraying area and all
explosive vapors.
2. Risk of Bursting. Do not adjust
regulator to result in output
pressure greater than marked
maximum pressure of attachment. Do not
use at pressure greater than the rated
maximum pressure of this compressor.
3. If connected to a circuit protected by fuses,
use time-delay fuses with this product.
3
Please contact 1-888-43-HUSKY for further assistance.
HUSKYTOOLS.COM