Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
7
At the other end of the cables from step 6, plug the HDMI
cables, USB 3.0 cable, microphone cable, and speaker
cable into their respective ports on the computer. Repeat
steps 6, and 7 for each dual-screen PC system you are
installing.
8
(Optional) Plug your USB peripherals into the front or rear
USB 3.1 Gen1 Peripheral Ports.
9
(Optional) If you choose to use the remote port selector,
plug its cable into the Remote Port Selector Jack, located
on the unit's rear panel.
10
Plug the power adapter included with the KVM switch into
an AC power source, then plug the power adapter cable
into the switch's Power Jack.
11
Power on the computers.
7
Publicidad
Tabla de contenido
