Publicidad
General
Tiger hand basin taps are designed for installation on hand basins with a tap opening of 30 - 37 mm.
The taps are connected to the cold water supply using flexible pressure hoses suitable for connection using
10 mm bulkhead couplings.
Boston hand basin tap assembly instructions
Installation:
(see accompanying drawings)
Before you start: Flush the pipes thoroughly in order to make sure there that no dirt can get into
the tap from the pipes. The warranty does not cover damage to interior parts as a result of dirt.
1.
Your Boston hand basin tap features an 'Easy fixing' system. This means that installation above
the hand basin requires no special tools. Check whether the assembly unit is put together
properly by comparing it with the drawing. The markings should always be facing outward
during assembly.
2.
Push the bottom plate through the hole in the sink by bending the flexible help strips somewhat.
3.
Hold onto both help strips and slide the top plate together with the flexible sealing washer.
4.
Insert the three assembly bolts (included) and tighten these firmly and evenly.
5.
Check whether the assembly plate is mounted straight with the marking on the front. Snip or
slice the help strips off.
6.
Push the flexible pressure hose through the opening of the assembly unit and put the tap on the
sink.
7.
Attach the tap to the assembly unit by firmly tightening the assembly screw on the back.
Turn on the water pressure and check for leaks.
Your tap is ready to use.
Features:
Your Hand basin tap features:
•
'Easy fixing' assembly system. The tap is installed from the top, without the need for any special
tools.
•
Ceramic discs.
•
Solid brass housing and handles.
Maintenance:
Clean with a soft, damp cloth; do not use any abrasives.
Service and warranty:
Tiger guarantees that your hand basin tap will work perfectly. However, should there be any problem with
your tap resulting from any production and/or material error, Tiger will replace the defect part(s) free of
charge within the 5 year warranty period. Your proof is purchase is also your warranty, and should be
submitted when making any warranty claims. The drawing on page 11 contains an overview of all of the
parts and the corresponding article numbers.
-2-
5000.5.03.52
5009.0.03.10
(chrome)
5009.0.09.10
(stainless steel pvd)
5000.5.55.05
5009.0.01.13
5005.2.07.05
5000.5.55.96
(R)
5000.9.03.20
(chrome)
5000.9.09.20
(stainless steel pvd)
5000.5.03.53
5000.5.03.30
(chrome)
5000.5.09.30
(stainless steel pvd)
5000.5.03.52
5000.5.03.01
5000.5.07.51
5000.5.01.10
( 2 pcs)
5000.5.03.9 8
5000.5.80.51
-11-
-12-
-13-
Publicidad
