4
SETTING THE CAMERA'S OPERATIONAL MODE
To change the camera operational mode, slide the mode switch horizontally to the corresponding
position.
5
TAKING PICTURES
1. Turn the camera on.
2. Set the camera to (
The LCD can be switched off to save battery power by pressing the (
button.
3. Frame the subject in the viewfinder or LCD.
4. Press the shutter button half-way to activate the auto-focus until the green AF
LED stops blinking and the AF frame turns green.
5. Press the shutter button fully to capture the image.
• When the image has been captured, the Flash Ready LED next to the
viewfinder will blink to indicate that the image is being stored.
6
SETTING THE FLASH
Press
A
A
DZ5062 QSG(514174-00)-E 3
A
AWB
⁄
⁄
Camera Mode
Use the camera mode to take pictures or to customize your camera settings
for picture taking.
Review Mode
Use the review mode to browse through images and video clips, to delete
images and video clips, to play a slide show, or to transfer the images/video
clips from the internal memory to the SD card.
Video Clip Mode
Use video clip mode to capture video clips with sound or to customize your
camera settings for video clip recording.
) Camera mode.
/
repeatedly until the desired indicator appears on the LCD.
Flash Mode
Auto Flash (Default)
A
A
Auto + Red-Eye
A
AWB
Flash On
Flash Off
A
AWB
)
Description
The camera judges if a flash is required. If the
environment is too dark, the flash will file.
Use this mode to significantly reduce the
occurrence of "red- eye" in flash photography.
The camera will automatically detect when the
flash is needed and the flash will fire after a short
delay.
Flash will fire in any lighting condition.
The "red-eye" reduction function is included also.
The flash will not fire in this mode. Please use
this mode if you want to capture the mood of the
ambient lighting or to use the available light in
places where flash photography is prohibited,
such as museums.
3
3
AWB
A
AWB
4
M
28/45
A
AWB
5/31/04, 4:13:52 PM
A