Using The Zoom - CONCORD 4062 AF Guia De Inicio Rapido

7

USING THE ZOOM

Press T (tele) to zoom in your subject, and press W (wide) to zoom out or return to the normal mode.
1x - 4x Zoom
The image increases in size on the LCD.
Original Size
A A
4 M
A A
A
AWB AWB
AWB AWB
AWB
6x Digital Zoom
The image contained within the red frame is the image recorded.
8
CLOSE-UP SHOOTING
1. Press button. The Macro icon (
2. Frame the subject in the LCD.
• The best shooting range is from 15 cm to 70 cm. (6 in. – 28 in.)
3. Press the shutter button half-way to activate the focus until the green AF LED stops blinking and the AF
frame turns green.
4. Press the shutter button fully to take the picture.
9
TAKING CONTINUOUS PICTURES
1. Press button. The Continuous Shot icon (
2. Frame the subject in the LCD screen and press the shutter button half-way to activate the focus until the
green AF LED stop blinking and the AF frame turns green.
3. Press the shutter button fully to capture the pictures.
• The camera will automatically capture 7 continuous images at approximately 3 images per second in 1600
x 1200 resolution.
4. If you do not want to take continuous pictures anymore, press
Note:
• In continuous shooting mode the flash is disabled as the recharging time will slow it down.
• The LCD will be blank when the images are taken in the Continuous Shooting Mode.
DZ5062 QSG(514174-00)-E 4
4x Zoom LCD Display
A A
4 M
28/45
A A
A
AWB AWB
AWB AWB
AWB
LCD Display
6x Digital Zoom
) will be displayed on the LCD.
) will be displayed on the LCD.
4 4
Actual Image Recorded
28/45
Actual Image Recorded
button until disappears from the LCD.
5/31/04, 4:14:23 PM