Technical Notes; Important - Bell & Ross BR 01-92 Manual De Instrucciones

Te c h n i c a l N o t e s
BR 01-92
Movement : mechanical with automatic winding. Calibre BR-CAL.302. 37 jew-
els. 28,800 vibrations per hour. Power reserve approximately 40 hours. High
precision setting to 4 positions (tolerance of 0/+10 seconds per day).
tions : hours, minutes, seconds. Time-setting with hacking function.
46 mm in diameter.
GENERAL USAGE
To unscrew the crown in position 0, rotate it anticlockwise.
When the watch has stopped , unscrew and pull the crown
Starting the watch.
out to position 1 and wind the movement by rotating the crown clockwise. After
approximately 40 rotations, the watch is fully wound (the winding mechanism
does not have a stop to prevent overwinding). The power reserve is approx-
imately 40 hours when fully wound. When the watch is worn , the automatic
mechanism will wind the movement.
Pull the crown out to position 3. The seconds hand will stop,
Setting the time.
enabling you to set the time to the nearest second. Set the time by rotating the
crown in the required direction.
STRAP MOUNTING
Attachments (E) with screws on the outer face of the lugs
The 4 socket head screws (hexagon socket/1.3 mm diameter) mount the strap
to the case attachments. These screws must be handled carefully, using the
2 tools supplied with the watch in its box.
Attachments (E) with no visible screws
A spring bar is used to fit the strap to the case attachments. This bar must be
removed carefully using the appropriate tool provided with the watch in the
box.
A
B
C
D
(x4)
E
A. Minute hand
B. Hour hand
C. Second hand
D. Case attachment screws
(NEVER UNSCREW)
E. Strap attachment
F. Crown
0. Unscrew the crown (rotate anticlockwise)
1. Wind the movement manually (rotate clockwise)
2. Neutral position or middle notch
3. Set the time (rotate in either direction)

IMPORTANT

Magnetic fields.
Func-
watch. Also, we would recommend that you avoid placing your watch near
Case :
electronic devices that may generate large magnetic fields (radio, smartphone,
television, computer, tablet, loudspeakers etc.).
Water resistance.
push the crown back to position 0. Never operate the crown underwater.
Note:
water resistance of the watch. To benefit from the Bell & Ross warranty, these
screws must never be unscrewed.
MAINTENANCE
After being immersed in seawater, it is recommended to carefully rinse off the
watch and strap with fresh water. It is also recommended to have the water
resistance of your watch checked every two years. To ensure a service that
meets the brand's exacting standards, any servicing of your watch must be
carried out by the Bell & Ross service centre or a watchmaker approved by
Bell & Ross. Whenever repairs are made during the warranty period, you must
present the Bell & Ross warranty card, duly dated and signed by the retailer at
the time the watch was purchased.
0 1 2 3
F
We thank you for the confidence that you have shown in our
brand and we hope that your Bell & Ross watch meets with
your complete satisfaction.
The Bell & Ross international guarantee
Your Bell & Ross watch has successfully passed the most rigorous reliability tests in the Swiss watch-making
industry. It is guaranteed against all manufacturing defects for 2 years from the date of purchase entered by the
Bell & Ross approved retailer on the international guarantee certificate subject to applicable laws and/or legal
guarantees. This guarantee is total (parts and labor). It excludes however:
. Damage that is the result of accidents or improper or incorrect use of the watch (violent shock, crushing,
brutal handling of the clasp).
. Damage that is the result of repairs or dismantling not carried out by an approved Bell & Ross retailer or an
approved after-sales service center.
. The results of normal use and wear of the watch and strap. This also excludes batteries given the specific
nature of these items.
IMPORTANT : To be covered by the Bell & Ross International Guarantee, any work must be carried out by
approved specialists : retailers approved by Bell & Ross, approved after-sales service centers.
This guarantee can only be applied on presentation of the Bell & Ross International Guarantee certificate, duly
completed, dated and signed by an approved retailer.
Models and Technical features subject to change
© Bell & Ross 05/2015
Magnetic fields can adversely affect the accuracy of your
Once the watch is set, to ensure perfect water resistance,
The 4 slotted screws (D) mount the bezel to the case and ensure the