Residual Risks; Electrical Safety - Stanley FATMAX FMC795B Manual De Instrucciones

ENGLISH
Children should not have access to
u
stored appliances.

Residual risks

Additional residual risks may arise when
using the tool which may not be included
in the enclosed safety warnings. These
risks can arise from misuse, prolonged
use etc.
Even with the application of the relevant
safety regulations and the implementa-
tion of safety devices, certain residual
risks can not be avoided. These include:
Injuries caused by touching any
u
rotating/moving parts.
Injuries caused when changing any
u
parts, blades or accessories.
Injuries caused by prolonged use
u
of a tool. When using any tool for
prolonged periods ensure you take
regular breaks.
Impairment of hearing.
u
Health hazards caused by breathing
u
dust developed when using your
tool (example:- working with wood,
especially oak, beech and MDF.)
Batteries
(not supplied)
Never attempt to open for any reason.
u
Do not expose the battery to water.
u
Do not store in locations where the
u
temperature may exceed 40 °C.
Charge only at ambient temperatures
u
between 10 °C and 40 °C.
Charge only using the charger
u
provided with the tool.
If the appliance is to be stored unused
u
for a long period, the batteries should
be removed.
4
(Original instructions)
When disposing of batteries, follow
u
the instructions given in the section
p
"Protecting the environment".
Do not attempt to charge dam-
aged batteries.
Chargers
(not supplied)
Use your Stanley Fat Max charger only
u
to charge the battery in the tool with
which it was supplied. Other batteries
could burst, causing personal injury
and damage.
Never attempt to charge non-
u
rechargeable batteries.
Have defective cords replaced
u
immediately.
Do not expose the charger to water.
u
Do not open the charger.
u
Do not probe the charger.
u

Electrical safety

Symbols on the charger
Read all of this manual carefully before using the
# appliance.
This tool is double insulated; therefore no earth wire
is required. Always check that the power supply
$
corresponds to the voltage on the rating plate.
The charger is intended for indoor use only.
Labels on appliance
The following symbols appear on this appliance along with the
date code.
Features
This tool includes some or all of the following features.
1. On/off power switch
2. Main handle
3. Power head
4. Tank