Technical Data For Electrical Connection - Inoxtrend ER304-USPE Instrucciones Para La Instalación, Uso Y Mantenimiento

EN
1.5 POSITIONING OF THE OVEN
The place where the oven will be installed must comply the following requirements:
• Be protected from atmospheric agents and have an adequate air circulation;
• Comply with regulations concerning safety at work;
• Have a room temperature between 5 °C and 35 °C with a humidification not higher than 70%.
• Place the oven and proceed with levelling using adjustable feet.
Keep a suitable distance at the back, in order the label of equipotential clamp is easy to see when the oven has
been installed.
The same clamp must be easy to access to install equipotential cable after the oven has been installed in compli-
ance with our instructions.
Install the appliance in a position that allows access to the right side for installation, maintenance and technical
assistance.

1.6 TECHNICAL DATA FOR ELECTRICAL CONNECTION

Model
4 x 460x340
grill 230V+ 1 ~ 50/60 Hz
4 x 2/3 GN
grill
230V+ 1 ~ 50/60 Hz
4 x 60X40
grill 230V+ 1 ~ 50/60 Hz
The ovens are supplied equipped with an electric power cable.
4 x 2/3 GN - 4 x 460x340 - 4 x 60x40 / DIGITAL
Power loading
and voltage
3.6 kW
3.6 kW
3.6 kW
no. and motor Heating
power power
2 x 55 W 2.8 kW
2 x 55 W 2.8 kW
2 x 55 W 2.8 kW
20
Grill Absorbed
power current
0.7 kW 15.6 A
0.7 kW 15.6 A
0.7 kW 15.6 A