Silva ADC WIND Manual Del Usuario página 25

10.7 Wind Speed Mode -
hold
[mode]
WIND mph
Wind Speed
21.3
18.3 8.3
hold
[mode]
Wind Speed Mode
Wind Speed Alarm Setting
Alarm OFF Alarm ON
WIND mph WIND mph
[set]
OFF ON
- - - -
18.3 8.3 18.3
hold [reset] [reset]
scroll scroll scroll through
the setting at the setting the settings by
a faster pace faster increment
Setting the Wind Speed Alarm and Time Span
Wind Speed Alarm and
Time Span Setting Sequence
[mode]
Time Span
Setting
Alarm
Time Span
Setting
WIND mph
AVG PERIOD
flash
50.3
SEC
8.3
hold [reset] [reset]
scroll scroll through
the setting at the settings by
a faster pace decrement
To Set the Wind Speed Alarm, and Time Span
for Average Wind Speed Calculation
!
To set the wind speed alarm, press and hold
the [mode] button for about 2 seconds to
select the setting display (wind speed starts
flashing).
!
When the 'wind speed' is flashing, press the
[mode] button to select between time span
setting and wind speed alarm setting.
!
When 'wind speed' is flashing, press the
[reset] button to scroll the target wind speed
level by 1 step (hold down the button to
scroll the setting faster). To select the wind
speed alarm between ON and OFF, press
10
the [set] button.
!
When 'time' is flashing, press the [set] or
[reset] button to scroll the target time span
for average wind speed calculation by 1
(hold down the button to scroll the setting
faster).
!
Press and hold the [mode] button for about
2 seconds to exit the setting sequence.
!
The setting display will change to Wind
Mode automatically if no key-stoke has
been activated for about 1 minute.