Publicidad
Idiomas disponibles
Idiomas disponibles
Reconnect the negative battery cable. Fig 18
Install speaker baffle over step hinges and install the six supplied Torx-head bolts – leave loose.
Test function of speaker system. Refer to Bluetooth Controller Manual.
Note: Inner and outer tailgates must be in the fully down position for the speaker
system to operate.
Install and tighten the four supplied screws. Do not overtighten! Fig 18
Tighten the six Torx-head bolts.
Fig 18
Close the step over the speaker baffle and
check clearance from step to baffle. If additional
Slide out for more clearance
clearance is needed open inner tailgate and
loosen the two hinge bolts on each side. Slide
step away from baffle and retighten hinge bolts.
Recheck clearance and make sure step still
closes easily. Fig 19
Refer to Bluetooth Controller Manual for
operation instructions.
Fig 19
7
Publicidad
