Altana BYK micro-TRI-color Instrucciones Resumidas página 10

micro-TRI-color
Take readings with worklist
In this mode a worklist can be downloaded from PC that includes predefined
sample names.
1. Click on instrument icon and a list showing the preloaded names appears.
2. Select appropriate sample by clicking on the corresponding row.
3. Press button Operate or click instrument icon to take a reading.
4. Circles represent the four pins on the bottom:
Green = Pressed. Red = Not pressed.
5. A minimum of three pins need to be pressed.
6. To cancel measurement click on back arrow.
7. Instrument must be lifted between readings.
8. Sample is automatically stored and deleted from work list.
To perform a regular sample measurement select "Sample XX" on top of the
list and proceed as described under "Take readings without worklist".
10
BYK-Gardner GmbH
300 100 116 2109