Product Specification; Packing List - Inateck BCST-70 Guia Del Usuario

Product Specification

EN
Model Number
Bluetooth Version
Battery Capacity
EEPROM
Light Source
Applicable Barcodes
Resolution
Decode Rate
Decode Mode
Print Contrast
Decode Angles
Bluetooth Operating Frequency
Bluetooth transmission Power
Transmission Range
Continuous Scanning Times
Charging Voltage
Scanning Width

Packing list

• Inateck BCST-70*1
• USB Cable*1
• Instruction Manual*1
FAQs
1. Will settings be kept when Inateck BCST-70 is power off?
Answer: All settings are made by scanning relevant barcodes, and stored in
scanner memory. They are kept even if scanner powers off. They are available to
users if scanner powers on.
2. Garbled or error appears in output result?
Answer: The default keyboard language of Inateck BCST-70 is English. Please refer
to the instruction manual about keyboard language, and set correct one.
3. Is there any barcodes to remove Enter for suffix?
Answer: Refer to the "Frequently Used Barcodes" in instruction manual, and use "Do
Not Apply Enter for Suffix".
13
Inateck BCST-70
Bluetooth V3.0
2600mAh
256K
Laser LED 650 ± 10nm
Codabar, Code 11, Code 128, Code39, Code 93, EAN-8, EAN-13, ISBN, ISSN, MSI,UPC-A,
UPC-E, IATA 25, Industrial 25 / Standard 25, Interleaved 25,Matrix 25, China Postal
Code，FedEx，USPS, Code 32, VIN
3mil
220 times/s
Single-Line Aiming
20%
Roll 30º，Pitch 75º，Yaw 80º
2402-2480Mhz
-4.36dBm
≥40m
100000 times
DC 5V
400mm @ 400mm