Activate Heating And Cooling - Avalon A14-S Manual Del Usuario

English
Getting Started

Activate Heating and Cooling

Before turning on the heating (#16) or cooling (#15) switches ensure water is already filling
inside the inner tanks by dispensing a drop of water from the water spout (#11).
To activate the cold water, push the cooling switch (#15) into the on (I) position by
pushing the top of the switch in. If you do not wish to have cold water you can leave
the switch in the off (O) positon.
To activate the hot water, push the heating switch (#16) into the on (I) position by pushing
the top of the switch in. If you do not wish to have hot water you can leave the switch
in the off (O) position.
Please allow 15 minutes for the hot water to be heated. During this time the heating indicator
light (#2) will be steady. The light will turn off when the heating process is complete. Please allow
1 hour for the cold water to be cooled. During this time the cooling indicator light (#4) will be
steady. The light will be turned off when the cooling process is complete. If any error occurs
in the heating or cooling process, the indicator light will blink.
13