Dispensing Water - Avalon A14-S Manual Del Usuario

English
User Guide and Maintenance

Dispensing Water

Cold Water
Once you have turned the cooling switch (#15) into the on (I) position it will take initially
1 hour for the water to cool. During this time the cooling indicator light (#4) around the
cold water button will blink. During this time the compressor could run continuously. This
is normal. The light will be turned off when the cooling process is complete.
1. Position a bottle, glass, pitcher or cooking pot below the water spout (#10).
2. Press the cold water button (#8) to begin the flow of water. You must continue to
press the cold water button in order for the water to continue to flow. While water is
dispensing, the button will light up blue.
3. Once the desired fill level is achieved, release the cold water button (#8) to stop
the flow of water.
Cool Water
1. Position the bottle, glass, pitcher or cooking pot below the water spout (#10).
2. Press the cool water button (#7) to begin the flow of water. You must
continue to press the cool water button in order for the water to continue to flow. While
water is dispensing, the button will light up orange.
3. Once the desired fill level is achieved, release the cool water button (#7) to stop the
flow of water.
Hot Water
Once you have turned the heating switch (#16) into the on (I) position it will take initially
15 – 20 minutes for the water to heat up. During this time the heating indicator light (#2)
around the hot water button will be steady. The light will be turned off when the heating
process is complete.
1. Position a bottle, glass, pitcher or cooking pot below the water spout (#10).
2. Press the child safety lock push button (#5) and press the hot water button
(#6) to begin the flow of water. You must continue to press the hot water button in order
for the water to continue to flow. While water is dispensing, the button will light up red.
3. Once the desired fill level is achieved release the hot water button (#6) to stop the flow
of water.
15