1. Accessory Check Up
Check the following items when opening the package:
• AC adapter × 1 (include Power Plug × 1)
• Speaker cable × 1
• Rubber foot × 8
• Warranty card × 1
• Operating Instructions (This Document)
2. Connect the Left and Right Speaker
Rear side of Right Speaker
SPEAKER OUT Jack
1.Unscrew the terminal a few turns until there is enough space to insert the exposed wire.
2.Connect the wire with a red belt to the red (+) terminal, and the wire with a black belt to
the black (−) terminal.
3.Once the wire is in position, tighten the terminal until the wire is firmly clamped.
4.Connect the pin plug to the SPEAKER OUT Jack of the right speaker.
Note
• To avoid magnetic interference or unwanted noise, never place this product too close to
any radiation devices.
Before Start
Rear side of Left Speaker
Speaker cable
5