Please observe the following five safety rules:
1. Disconnect.
2. Ensure that the instrument cannot be turned back on again.
3. Ensure isolation from the main supply voltage
(check that there is no voltage on both poles).
4. Earth and short-circuit.
5. Cover neighbouring parts that are under live electrical load.
Proper and intended use
This instrument is intended for use in applications described in the operation manual only.
Any other usage is considered improper and non-approved us-age and can result in accidents
or the destruction of the instrument. Any misuse will result in the expiry of all guarantee and
warranty claims on the part of the operator against the manufacturer.
Remove the batteries during longer periods of inactivity in order to avoid
damaging the instrument.
We assume no liability for damages to property or personal injury caused by
improper handling or failure to observe safety instructions. Any warranty
claim expires in such cases. An exclamation mark in a triangle indicates
safety notices in the operating instructions. Read the instructions completely
before beginning the initial commissioning. This instrument is CE approved
and thus fulfils the required guidelines.
All rights reserved to alter specifications without prior notice
© 2014 Berner Trading Holding GmbH, Germany.
Disclaimer and exclusion of liability
The warranty claim expires in cases of damages caused by failure to ob-
serve the instruction! We assume no liability for any resulting damage!
Berner is not responsible for damage resulting from:
|
failure to observe the instructions,
changes in the product that have not been approved by Berner,
|
the use of replacement parts that have not been approved or manufactured by Berner,
|
the use of alcohol, drugs or medication.
|
Correctness of the operating instructions
These operating instructions have been created with due care and attention. No claim is made
nor guarantee given that the data, illustrations and drawings are complete or correct. All rights
are reserved in regards to changes, print failures and errors.
9