Parts List; Technical Data - monzana DBDL004 Manual Del Usuario

PARTS LIST

3
1
4
2
PART NO.
TRIGGER 1
CONNECTOR (COUPLING) 2
RECEIVING CHUCK 3
REVERSE OPERATION SWITCH 4

TECHNICAL DATA

MODEL DBDL004
SPEED WITHOUT LOAD 1800 U/Min.
OPERATING PRESSURE 6.2 bar
BORE CONNECTION TO AIR ¼ Zoll
SUPPLY
AVERAGE AIR THROUGHPUT 113 L/Min.
SIZE OF RECEIVING CHUCK 10 mm
TYPE OF RECEIVING CHUCK Fixes without
a tool
LpA (sound pressure) 84dB (A)
LwA (sound power) 105dB (A)
SAFETY
• The working area must always be kept clean
• Machines or electrical appliances must never
be used in the presence of liquids or moisture
and should not be exposed to rain. The working
area should always be adequately illuminated.
in the vicinity of electrical equipment.
• Children must be kept away from the working
area. Children must never touch or play with
machines, device cables or hoses.
• Only use the device appropriate to the work
required. Those who need a professional device
should never work with a device that is too
and may only be used for these purposes. No
as using it in another capacity.
• Always wear appropriate and suitable clothing.
Baggy clothing or jewellery should not be worn
as these can get caught up in moving parts.
electricity. You should always cover your hair
with a hair net!
•
goggles that comply with ANSI
standards as well as a full face mask and hearing
working, for example from wood or metal, a
dust mask or breathing apparatus compliant
with ANSI standard must be worn.
• Work at "arms length" and never touch
machines when running or air hoses. Ensure
you have a secure foothold!
•
ensure that equipment and parts are well
cables and air hoses must be checked regularly.
Damaged parts may only be repaired by a
specialist. Handles and levers must be clean,
dry and free from residues of grease/oil.
•
being used, it must be disconnected from the
compressed air supply and the air hose must be
removed.
www.Deuba24online.de
•
adjusters and tools on or in the device or its
parts.
• The device must never be allowed to start
used or is not yet connected to the compressed
air supply, the trigger or switch must always be
on the switch or trigger, regardless of whether
the device is connected or not.
•
•
lead to serious injuries!
• Before each use of the device, check it
sure it will work properly and is suitable
for the intended purpose! Look out for any
parts may only be repaired by a specialist. If
the trigger and switch do not work properly or
there is any damage, the device must not be
used!
• When maintenance is carried out on the device,
ensure that only the correct spare parts are
used. Using other parts voids the guarantee.
• Protect yourself against possible electric shock
and avoid any contact with earthed objects.
• When using extension cords, make sure that
capacity to ensure that the compressor does not
overheat and is not damaged when connected
with the cable.
• Only use compressed air in the compressor
10 11 www.Deuba24 online. de
USE
Working with compressed air
• Before the device is connected to the
compressed air supply, the supply valve and the
trigger must be completely locked.
•
works using an air pressure of 90 psi.
• NOTE: The compressed air supply must be clean
and the maximum pressure of 90 psi when
working with the device must not be exceeded.
compressed air can lead to excessive wear and
are very dangerous and can cause serious injury
and damage.
• The liquid that collects in the compressor
tank must be regularly drained. Water in the
compressed air supply will damage the device.
•
• Never lay the air hose in areas where there are
sharp edges, heat or oil. Check the air hose and
• When using compressed air supply lines of
more than 8m, the pressure must be matched
accordingly. The hose must have an inner
diameter of at least 0.95cm (3/8 inch) and the
Important note
If your compressed air system does not have a
lubricate the compressed air device every 2 hours
with 2-6 drops of oil. This can be applied through
the specially designed nozzles in the device's
casing. The amount, however, also depends
environment.