Airzone AZX6CCPWSCC Guia De Inicio Rapido página 23

RadianT*
Mode Demand
Stop Off
Cooling Radiant
mode
Off
Heating Radiant
mode
Off
Dew warning On
active
Off
*Only for Airzone RadianT365 system (AZRA6).
For Acuazone and Innobus Pro 32 systems versions v.4.4.1 or higher: In any configuration of the Acuazone central
operating logic, zones with air flow stage configured as (Direct Expansion) DX will not generate air demand in the production
control board. Remember that in both zoned or mixed configurations, when the air flow stage of a zoned area is modified, the
same configuration will apply to the rest of the zones in the group.
Important: The following combinations will not generate air demand in the production control board:
- Communication gateway (AZX6QADAPTxxx / AZX6QADAPT3xxx / AZX6GTC xxx / AZX6ELECTROMEC) in Flexa 3.0,
Innobus Pro6, Acuazone and Innobus Pro32 (v.4.4.0 or lower) main control boards.
- Gateway modules (AZDI6MCIFR [C/R] / AZDI6MCxxx [C/R] / AZDI6ZMOxxx [C/R]) in Acuazone e Innobus Pro32 (v.4.4.0
or lower) systems (when configured as a zoning system or mixed system).
Important: To guarantee the optimization of the production temperature of the aerothermal units, these device combinations
do not generate radiant demand to the production control board:
- Zoning module for Electrical Heating Element (AZDI6MZSRE [C/R]) in Acuazone and Innobus Pro32 systems regardless
of the Main Control Board configuration.
SW2
To force the production control board to search for the connected systems and save the configuration of the installation, press
SW2.
Internet connection
To connect the webserver to internet to control Airzone systems through the Cloud
platform, must connect the device to the router through an ethernet cable.
FRIO_Y CALORB_W
-- --
ON --
-- --
-- ON
-- --
ON --
ON --
Control Relays
AIRE_Y RADIANTE_Y
-- --
-- ON
-- --
-- --
-- --
ON --
ON --
AIRE_W RADIANTE_W
-- --
-- --
-- --
-- ON
-- --
-- --
-- --
21
ES
EN
FR
IT
PT
DE