Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
OBJ_BUCH-1831-001.book Page 11 Tuesday, November 27, 2012 9:37 AM
English
Safety Notes
Read and observe all instructions.
SAVE THESE INSTRUCTIONS FOR FU-
TURE REFERENCE.
Have the measuring tool repaired only through
qualified specialists using original spare parts.
This ensures that the safety of the measuring
tool is maintained.
Do not operate the measuring tool in explosive
environments, such as in the presence of flam-
mable liquids, gases or dusts. Sparks can be
created in the measuring tool which may ignite
the dust or fumes.
For technological reasons, the measuring tool
cannot ensure 100 % certainty. To rule out
hazards, safeguard yourself each time before
drilling, sawing or routing in walls, ceilings or
floors by means of other information sources,
such as building plans, pictures from the con-
struction phase, etc. Environmental influences,
such as humidity or closeness to electrical devic-
es, can influence the accuracy of the measuring
tool. Surface quality and condition of the walls
(e.g., moisture, metallic building materials, con-
ductive wallpaper, insulation materials, tiles) as
well as the amount, type, size and position of the
objects can lead to faulty measuring results.
Product Description and
Specifications
Please unfold the fold-out page with the represen-
tation of the measuring tool and leave it unfolded
while reading the operating instructions.
Intended Use
The measuring tool is intended for the detection of
metals (ferrous and non-ferrous metals, e.g., re-
bar), joists and "live" wires/conductors in walls,
ceilings and floors.
2 609 140 979 • 27.11.12
Product Features
The numbering of the product features shown re-
fers to the illustration of the measuring tool on the
graphic page.
1 Illuminated ring
2 Marking hole
3 Display
4 Operating-mode indication
5 On/Off button
6 Display-illumination button
7 Audio signal button
8 Button for detecting "live" conductors/
Operating mode "Power cable"
9 Button for metal detection/Operating mode
"Metal"
10 Button for detecting wood and metal
beams/Operating mode "Drywall"
11 Contact pads
12 Sensor area
13 Type plate
14 Battery lid
15 Latch of battery lid
16 Fixture for carrying strap
17 Protective pouch
18 Carrying strap
The accessories illustrated or described are not includ-
ed as standard delivery.
Display Elements (see figure A)
a Switched-off audio signal indicator
b Warning-function indicator
c Indication of the object type "Non-metal
object"
d Indication of the object type "Non-magnetic
metal"
e Indication of the object type "Magnetic metal"
f Indication of the object type "Live conductor"
g Temperature control indicator
h Battery indicator
i Measuring indicator
j Fine scale
k Indication "CENTER"
English | 11
Publicidad
Tabla de contenido
