Uline H-5592 Manual Del Usuario página 2

STEP 1:
Lay the platform on its side and bolt the stile on the
top of the platform with the nuts on the outside of the
platform. Snug the bolts, but do not tighten them.
(See Figure 1)
Figure 1
STEP 2:
Bolt on the other stile to the top of the platform with the
nuts on the outside of the platform. Snug the bolts, but
do not tighten them. (See Figure 2)
Figure 2
PAGE 2 OF 6
ASSEMBLY CONTINUED
STEP 3:
Bolt on the left and right handrail to the top of the stiles
and platform. Tighten the handrails from the joint in the
center. Snug the rest of the bolts, but do not tighten
them. (See Figure 3)
Figure 3
STEP 4:
Lift the crossover ladder with two or more people to
stand it upright on its feet. Bolt the stile on the opposite
side and the handrails. Snug the bolts and start with
tightening the joint in the center of the handrail first, then
tighten the remaining bolts. (See Figure 4)
Figure 4
1-800-295-5510
uline.com
0521 IH-5592