Technical Data; Noise/Vibration Information - Berner BACAGXB 18V Manual Original

A special protective guard for cutting must be
used when cutting bonded abrasives.
Sufficient dust extraction must be provided when
cutting stone.
With approved abrasive tools, the power tool can
be used for sanding with sanding discs.
The power tool must not be used to grind con-
crete.
Product features
English
The numbering of the product features refers to
the diagram of the power tool on the graphics
page.
(1) Unlocking lever for protective guard
(2) Direction of rotation arrow on housing
(3) Lever
(4) LED work light
(5) On/off switch
(6) Rechargeable battery
(7) Battery release button
(8) Auxiliary handle (insulated gripping surface)
(9) Protective guard for grinding
(10) X-LOCK grinding disc/flap disc
(11) Protective guard for cutting
A)
(12) X-LOCK cutting disc
(13) Handle (insulated gripping surface)
(14) X-LOCK holder
(15) Hand guard A)
(16) X-LOCK backing pad for fibre discs
(17) X-LOCK fibre disc A)
(18) X-LOCK clip for fibre discs
(19) X-LOCK cup brush/disc brush
(20) X-LOCK diamond core cutter
(21) Extraction guard for cutting with cutting
A)
guides
(22) X-LOCK diamond cutting disc
A) Accessories shown or described are not included
with the product as standard. You can find the com-
plete selection of accessories in our accessories
range.

Technical data

English
Angle grinder
Article number
Rated voltage
A)
Rated speed
Max. grinding disc dia-
meter
Restart protection
20 | English
A)
A)
A)
A)
A)
A)
A)
A)
A)
BACAGXB
18V
409011
V= 18
-1
min 11,000
mm 125
●
Angle grinder
Weight according to EPTA-Procedure 01:2014
– with low-vibration
auxiliary handle
– with standard auxili-
ary handle
Recommended ambient
temperature during
charging
Permitted ambient tem-
perature during opera-
tion B) and during stor-
age
Recommended re-
chargeable batteries
Recommended char-
gers
A) Depends on battery in use
B) Limited performance at temperatures <0 °C

Noise/Vibration Information

Noise emission values determined according to
EN 60745-2-3.
Typically the A-weighted noise level of the power
tool are: 86 dB(A); sound power level 97 dB(A).
Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and un-
h
certainty K determined according to
EN 60745-2-3:
Surface grinding (roughing):
2 2
a = 6,5 m/s , K = 1,5 m/s
h
Disc sanding:
2 2
a = 2,5 m/s , K = 1,5 m/s
h
The vibration level given in these instructions has
been measured in accordance with a standard-
ised measuring procedure and may be used to
compare power tools. It can also be used for a
preliminary estimation of exposure to vibration.
The stated vibration level applies to the main ap-
plications of the power tool. However, if the power
tool is used for different applications, with differ-
ent application tools or poorly maintained, the vi-
bration level may differ. This can significantly in-
crease the exposure to vibration over the total
working period.
To estimate the exposure to vibration accurately,
the times when the tool is switched off or when it
is running but not actually being used should also
be taken into account. This can significantly re-
duce the exposure to vibration over the total work-
ing period.
Implement additional safety measures to protect
the operator from the effects of vibration, such as
BACAGXB
18V
A)
kg 2.2–3.2
kg 2.0–3.0
°C 0 to +35
°C –20 to +50
BBPB 18V
4.0Ah Li-Ion
BACB 18V
English
,
.
1 609 92A 5K8 • 29.6.20