Oxygenics Fury RV Instrucciones Para La Instalación Fácil

F rV
ury
EASY INSTALLATION
INSTRUCTIONS
STEP 1
Remove your existing
shower head. To
remove, turn the
existing shower head
in a counterclockwise
direction.
STEP 4
In a clockwise
direction, screw end
of hose to the taped
portion of the shower
arm. Hand tighten
only.
USING THE
FLOW CONTROL
Located on the back of the shower head, the
flow control regulator
eliminates sudden
blasts of water.
Note: The flow
control is not a
shut off valve. When
turned to the lowest position, the shower
head continues to flow. This is a normal
safety feature. Unit may be in lowest flow
position during shipping. Check the position
of flow control upon installation.
STEP 2
Remove any remnants
of old plumber's tape
and flush out shower
pipe for 5 to 10
seconds.
STEP 5
Attach other end
of hose to base of
handheld and hand
tighten.
EASY TWIST SPRAY
SELECTION
Enjoying multiple
spray patterns
during your shower
has never been
easier. With the
Fury's easy twist
design, simply rotate
the easy spray selector
for a quick spray change.
STEP 3
Wrap plumber's tape
clockwise 3 or 4 turns
around threaded end
of shower arm.
STEP 6
Attach double stick
tape provided to back
of holder and press
firmly to clean, dry
shower wall. Place your
new handheld shower
head into holder.
STOP!
NEED HELP?
PLEASE DO NOT RETURN THIS
PRODUCT TO THE STORE.
If you need installation assistance, replacement
parts or have questions regarding our warranty, our
Customer Service team can be contacted by:
PHONE:
1-866-440-9257
775-420-5600
or
LIVE CHAT:
www.oxygenics.com
EMAIL:
support@oxygenics.com
ONLINE:
www.oxygenics.com/claims
Business hours:
Monday - Thursday 7:00 am to 5:00 pm PST
Friday 7:00 am to 4:30pm PST*
*Closed on all nationally observed holidays
For use with automatic
compensating valves
rated at 1.35 GPM
(5.11 L/min) or less.