Descargar Imprimir esta página

Auto-T 540112 Modo De Empleo página 9

Kit manos libres y transmisor fm, cargador usb

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 4
2. When you first use the Bluetooth kit, your mobile phone must be switched on. Activate
your mobile telephone's Bluetooth function and then search for the new device. When the
mobile phone detects the device called CAR KIT, select it and pair with it, using the initial
password 0000.
3. When you are playing music, the device switches automatically into telephone mode if
there is an incoming call.
NB: the Bluetooth icon on the device's screen stops flashing when it has paired with your
mobile phone.
Bluetooth call
1. Press the green "Answer" button on the front of the transmitter, to answer an incoming call.
2. Press the red "End call" button on the upper part of the transmitter, to hang up.
3. When you wish to make a call, enter the number on your mobile phone and, when the call
is connected, you can use the hands free function.
Using the USB charger function
When the device is powered from the cigar lighter socket, use a special USB cable (not sup-
plied) to connect your mobile phone to the device's USB port. The device will then operate as
a charger for your mobile phone.
Setting up the menu
When the device is playing files from a USB key or a Micro SD card, follow the instructions
below to change the menu settings:
1. Press the  
button to pause playback.
2. Hold "CH" pressed down to go down through the list of menu settings to access: Card
folder, Del. file, Del. all, Languages, Contrast, Micro-software version no., Quit
3. You can start set-up.
Instructions for use
On the transmitter
1. To answer/pick up
Press the green answer button to
answer a call.
Press the red button to end a call.
2. Play/pause music.
Pressing the 
music.
Pressing 
English
On the remote control
Press the
button: plays the
Press the
button.
again: pauses it.
3. To adjust the volume
4. To adjust the frequency
5. To select music
6. To select the equaliser
setting
7. To change folders
button.
Holding the
button pressed
Press + to increase the
down: increases the volume.
volume.
Holding the
button pressed
Press – to reduce the
down: reduces the volume.
volume.
First press the "CH" button and
Press the "CH+" button:
then
: to move up the frequen-
to move up 0.1 MHz.
cy range.
Press the "CH-" button:
Press 
 : to move down the
to move down 0.1 MHz.
frequency range.
Or enter the figures for
the desired frequency
and then press "CH+" to
confirm.
Press the 
button: to play the
Press the 
next track.
play the next track.
Press the 
button: to play the
Press the 
previous track.
play the previous track.
Or enter the track num-
ber and then press
to confirm.
Only on the remote control
Press the "Equaliser Set-
ting" button to choose
your favourite equaliser
setting.
Press the folder button
First press the
button, then
to change folders.
hold the "CH" button pressed
down, to access the menu list.
Then select the required folder in
the "Card folder" section.
English
button, to
button, to

Publicidad

loading

Productos relacionados para Auto-T 540112