Temperature Control; Door Handle Installation - Danby DCFM171A1WDB Manual Del Usuario

OPERATING INSTRUCTIONS

TEMPERATURE CONTROL

1. Power indicator light: Illuminates when the
appliance is connected to a working power
source.
2. Run indicator light: Illuminates when the
compressor is running.
The temperature of the appliance is controlled
by setting the thermostat dial on the front of the
cabinet.
• The number 1 indicates the warmest setting.
• The number 7 indicates the coldest setting.
• The number 4 setting should be suffi cient for
regular home use.
• The temperature range of the appliance is
approximately -12 ~ -24°C (10.4 ~ -11.2°F).
• To stop the cooling function, turn the dial to the
"0" position.
Important:
• The temperature inside the appliance can
vary based on ambient room temperature, the
frequency that the lid is opened and the amount
of fresh food that has recently been added to the
appliance.
• Do not overload the appliance as this can affect
performance.
• Do not freeze large quantities of fresh food at
the same time.
1 2

DOOR HANDLE INSTALLATION

1. Remove the handle base, the handle cover and
the screws from the accessory bag. Remove the
screw hole plugs from the lid and attach the
handle base to the lid using the screws.
2. Insert one end of the handle cover into the side
of the handle base.
3. Insert the other end of the handle cover into the
handle base.
4. Press the handle into the base until it clicks.
Repeat this process for both handles.
1
2
3
4
4