Eldom COLUMBIA VAC KC100 Manual De Instrucciones página 13

NOTE
Do not turn the unit on without a correctly installed filter (7) and tank (9).
NOTE
The cooling cartridges (11) are empty. Fill and freeze them before use.
DEViCE FUNCTiONiNG
The air flow from the air conditioner should not be directed straight at persons.
The cold-air flow can be controlled by means of blinds.
The movement of the vertical blinds (3) is switched on by pressing the "SWiNG" button.
The horizontal blinds (4) are set manually.
OPERaTiON
Place the device on a flat, stable, surface.
Turn the lock knob (10) to the left (Fig. 4), remove the water tank (9) from the device body (5), and
pour in the water.
NOTE
Do not exceed the maximum level marked on the tank (9).
When using cooling cartridges (11), first put them in the tank (9), and only then pour the water
in, without exceeding the maximum level
Press the "0" switch to check if the unit is switched off and then connect the unit to a power network
compliant with the parameters specified on the unit.
Press "1", "2", or "3" switch to switch on the unit and select the fan speed.
To switch the unit off press the "0" switch.
FUNCTiONS
Cooling
Press the "COOL" button.
Press the "COOL" button again to deactivate the function.
NOTE
Before activating this function, check that there is water in the tank, and check whether the
water level is sufficient during operation.
The unit with the cooling function switched on will not operate without water.
osCillation
Only vertical blinds rotate automatically.
To activate the oscillation, press the "SWiNG".
Press the "SWiNG" button again to deactivate the function.
CLEaNiNG aND MaiNTENaNCE
NOTE
Before carrying out any maintenance or repair work, switch off the device and disconnect it
from the power supply.
It is recommended to clean the water tank (9) regularly.
•
EN 13