Connecting The Subwoofer; Connecting The Power - Loewe klang bar5 mr Guía Completa Del Usuario

Loewe klang bar5 mr

Connecting the soundbar
Note
• Your TV must support the HDMI-CEC and ARC
function. HDMI-CEC and ARC must be set to On.
• The setting method of HDMI-CEC and ARC may
differ depending on the TV. For details about
ARC function, please refer to your TV operating
instructions.
• Only cables compatible with HDMI version 1.4 or
higher can support the ARC function.
Option 2 - Standard HDMI
If your TV is not HDMI ARC-compliant, connect your
Soundbar to the TV through a standard HDMI con-
HDMI OUT
HDMI IN 1 HDMI IN 2
HDMI OUT
eARC / ARC
HDMI IN
nection.
1. Use an HDMI cable to connect the Soundbar's
HDMI IN (1 or 2) connector to your external
devices (e.g. game consoles, DVD players and
blu-ray).
2. Use an HDMI cable to connect the Soundbar's
HDMI OUT (TV eARC/ARC) connector to the
TV's HDMI IN connector.
Note
This connection option allows only playback of video/
audio from external devices connected directly to the
HDMI 1 or 2 inputs on the soundbar. If your TV does
not have an HDMI ARC connector and you wish to
play sound from TV on the soundbar, you will need to
use alternative connection (e.g. Optical or Analogue).
19
6.3 Connecting with an optical
cable
Using an optical cable (not included), connect the
OPTICAL connector on your soundbar to the OPTICAL
OUT connector on the TV or other device.
Blu-ray Player / DVD Player /
• The digital optical connector might be labeled
Recorder / Set-top Box...
SPDIF or SPDIF OUT.
6.4 Connecting with an analogue
audio cable
Option 1
Use a 3.5mm to 3.5mm audio cable (not included) to
connect the TV's or external audio device headphone
socket to the AUX IN socket on the unit.
Option 2
Use an RCA to 3.5mm audio cable (not included) to
connect the TV's audio output sockets to the AUX IN
socket on the unit.
6.5

Connecting the power

Note
• Before connecting the AC power cord, ensure you
have completed all other connections.
• Risk of product damage! Ensure that the power
supply voltage corresponds to the voltage printed
on the underside of the unit
OPTICAL
OPTICAL OUT
AUX
Headphone
(3.5mm )
AUDIO OUT
AUX
L
R
AUDIO OUT
.
AC IN
1. Connect the mains cable to the AC IN Socket
of the soundbar and then into a mains socket.
2. Connect the mains cable to the AC IN Socket
of the subwoofer. Secure the cable to the cable
management compartment on the bottom side
of the subwoofer. Finally, plug the power cable to
the mains socket.
6.6

Connecting the subwoofer

Automatic Pairing
The subwoofer provided is a WDAL 2.0 device. This
means that for the subwoofer to work, the WDAL 2.0
switch labelled SUB must be set to SMALL or LARGE.
Remove rear flap from soundbar and check the position
of the SUB switch. If it is in OFF position, please change
its position to SMALL or LARGE.
Plug the soundbar and the subwoofer into the mains
sockets and then press on the unit or remote
control to switch the unit to ON mode. The subwoofer
and soundbar will automatically pair.
• Determine the status based on the wireless sub-
woofer indicator.
LED indicator state Status
Subwoofer is in pairing
LED flashes quickly
mode
Connected / Pairing
LED is on
successful
Connection / Pairing
LED flashes slowly
failed
Note
Do not press volume knob on the rear of the subwoofer,
except for manual pairing.