Charging Status Display - Swiss Made Xplorer/C Traducción Del Manual Original

Fig. 5
Fig. 6
1
Fig. 7
6.4

Charging status display

1
2
3
Normal charging
The green light indicates that the battery is charged. The charging process
is displayed differently depending on the status:
Instruction Manual / Cattle and Horse Clipper
Without applying force, insert the
X X
battery from above into the charging
bay provided on the charger.
The battery will now start charging.
X X
The status of the charging process
is displayed using LEDs (see also
chapter 6.4). As soon as the battery
has finished charging, all the LEDs
change from red to green and the
charger switches to "trickle charging".
Push the charged battery into the
X X
clipper until the battery latch (1) en-
gages on both sides.
The LEDs are shown as follows in these operating
instructions:
1 LED switched off
2 LED lights up red
3 LED lights up green
Four charging statuses are displayed with the LEDs:
Power supply unit connected
The continuous green light on the lower LED signals
that the power supply unit is correctly plugged into
the power socket. The charger is supplied with
power and is ready to operate.
Discharged battery, 0 % battery charge
13