Start-Up Wizard - Saci EASYTRONIC Manual De Instalación Y Mantenimiento

10. START-UP WIZARD

The first time we power up our equipment, a configuration wizard will start us where the basic
parameters will be entered in order to start up the device and the pumping group.
NOTE 1: In the selection of the type of application, if a system of sewage lifting pumps is required, where
each pump is activated and stopped individually through a float switch (each float switch active and stops one
pump, and there is no float switch for common stop), must be selected as the BOOSTER SET application type.
NOTE 2: All data entered or calculated in the wizard can be modified afterwards through the configuration
menu.
Language selection for menu display, warnings or messages on
the display.
Setting the current time and date, essential for controlling the
start/stop of the pumps and relays by time clock and for the
control of the fault register.
Selection of the number of pumps that make up the installation.
(We will only display this screen on the device for 2 pumps).
Adjustment of the nominal amperage of the motors, with the
possibility of selecting different nominal motor amperage for
pump 1 or pump 2.
Selection of the type of application where the device will be
used.
Information screen that tells us that the next thing we are going
to select is the start/stop device for the pumps.
In case of having selected the COMBINED type of application,
the screen will differentiate us if we are selecting the device for
pump 1 or for pump 2.
User can select connected device to start/stop the pump.
The options available will depend on the type of application
previously selected.
Information screen that tells us that the next thing we are going
to select is the protection device against lack of water for the
pumps. In case of having selected the COMBINED type of appli-
cation, the screen will differentiate us if we are selecting the
device for pump 1 or for pump 2.
The user can select the connected device for the safety stop
of the pump. The options available will depend on the type of
application previously selected.
The user is informed that the general device setup wizard has
finished.
31