Oxygenics VITALITY Instrucciones De Montaje página 4

DRAIN INSTALLATION
6
1
3
5
7
6.
For installing the Drain Assembly unit remove the bottom
drain assembly (6B): which includes Drain Mounting Gasket
(3), Drain Mounting Nut and Clear Washer (4), Lower Drain
Gasket (5), Lower Drain Nut and Lower Pop-Up Body (6)
from the top drain assembly (6A): which includes Upper
Gasket (1) and Pop-Up Body (2).
8
3
5
8.
Screw the Lower Drain Gasket (3), Clear Washer (4) and
Drain Mounting Nut onto the Upper Pop-Up Body by
turning Drain Mounting Nut clockwise. Insert Lower Drain
Gasket into Lower Drain Nut (6) and turn clockwise until
secure as shown in the Figure 4.
6A
UPPER
DRAIN
2
ASSEMBLY
4
6B
6
LOWER
DRAIN
ASSEMBLY
2
FIG 4
4
6
7
1
7.
For the upper drain assembly insert the pop-up body (2)
into the sink. Ensure that the upper gasket (1) rests securely
between the top of the sink and the top of the pop-up body
(2) as shown in the Figure 3.
9
5
9.
Connect the Lower Pop-Up Body (5) to the trap.
2
FIG 3