Oxygenics VITALITY Instrucciones De Montaje página 7

FLUSHING AND CHECKING FOR LEAKS
14
B
FIG 12
14.
Ensure the Spout Handles (B+C) are in the off position
and turn on the water supply (See Figure 12) to check for
leaks. If you discover any leaks, check your connections to
ensure they are properly installed.
16
B
16.
Turn off the hot and cold Spout Handles (B+C) and reinstall
Aerator using Aerator Removal Tool (J). Your Vitality Faucet
is now fully installed and ready for use!
15
A
C
A
J
15.
Remove the Aerator using Aerator Removal Tool (J) by
inserting tool into Faucet Spout (A) and rotating in a
counter-clockwise direction as shown in Figure 13. Turn on
the hot and cold Spout Handles (B+C) to allow the water
to run for at least one minute.
A
C
A
B
C
FIG 13