secudo D 110 Manual Del Usuario página 31

Explanation
Alarm triggered when smoke is detected
Silenced when the alarm is triggered
Detector's fault signal indicating a flat battery
Fault signal indicating that there is a fault with the
detector's measuring chamber
Fault signal received from a detector with a flat battery
that is linked via radio
Ready for operation / standard mode / detector is
operating correctly and is ready to detect smoke
Solution
Silence the alarm signal for approx. 10-13 minutes
Other detectors linked via radio will also be muted.
Silence the alarm signal for approx. 10-13 minutes
Other detectors linked via radio will also be muted.
Replace the battery.
Remove the battery for 5 minutes and then reinsert it. If
this does not eliminate the fault, the entire detector must
be replaced.
Replace the battery in the relevant detector.
31