Nordcap LUXOR DOUBLE Manual Del Usuario página 13

Remove the wooden and polystyrene parts inside the appliance.
To install the shelves, follow what is indicated below:

Pre-assemble the shelf supports on the racks, taking care to properly position the rear supports
(larger) and the front supports (smaller) at the same height.

Make sure that the steel support hooks are inserted properly in the rack holes. To ensure proper
support insertion, use a small hammer with a rubber head, if necessary.

Insert the various shelves, making sure not to subject them to impact.
Adjust the leveller feet found under the unit so that it does not shift or rock.
WARNING: Position the unit at least 10 cm away from the rear wall. It is possible to place units side by side,
yet in any case there must be at least 5 cm space between one unit and another.
min.
min.
10 cm
5 cm
min.
5 cm
WARNING: Make sure that the unit is not exposed to direct sunlight, or any other sources of heat nor placed in
environments with high temperatures; any of these would cause the unit to wear more quickly and perform poorly.
The units have been declared to be in the 4 (T = 30° C U.R. = 55%) climate class.
6