Eldom currly HS7N Manual De Instrucciones página 8

INSTRUCTION MANUAL
EN
CURL STYLER HS7N
GENERAL DESCRIPTION
1. ON/OFF switch
2. Control lamp
3. Spring clip lock
4. Spiral curling guide
DANE TECHNICZE
- power: 35 W
- supply voltage: 230 V ~ 50 Hz
HOW TO USE THE APPLIANC
The appliance is designed for hair styling. The curler should be used for dry hair. Place the
appliance on a flat surface and plug it in. Turn the curler on by pressing ON/OFF switch (1).
If the appliance is in operation, the control lamp (2) is on. Wait for about 5 minutes until
the curler heats up to the appropriate temperature.Carefully comb hair and divide it into
3cm strands. Shift the spring clip lock (3) and secure the hair strand by blocking the lock.
Release the spring slip lock (3) and start styling. Hold the styler in the hair no longer than
20 seconds. Avoid touching with the fingers the heated elements of the curler when the
appliance is on. After use, turn the appliance off by pressing the ON/OFF switch (1) and
remove the power cord from the socket.
CLEANING AND MAINTENANCE
- Before cleaning, disconnect the appliance from the mains.
- Clean the appliance only if it is cold.
- Do not immerse in water.
- The external surfaces can be cleaned with a damp cloth.
- Do not use heavy-duty or surface-damaging detergents and cleaning products.
ENVIRONMENT PROTECTION
- The device is made of materials that can be reused or recycle.
- It should be handed to the special collection point, that deals with collection and recyc
ling of electronic and electric devices.
WARRANTY
- The blender is only intended for household use.
- It cannot be used for commercial purposes.
- The warranty loses validity in case of inappropriate use.
•
8 EN
4 3 2 1