The Friedrich C-90A Electronic Air Cleaner; Caution: Before Operating The Unit - Friedrich C-90A Guia De Funcionamiento

The Friedrich
C-90A Electronic
Air Cleaner
CAUTION:
Before
operating
the unit
The Friedrich Electronic Air Cleaner is a self-contained console model
consisting of a high voltage DC power supply, electronic cell, 3 speed
fan, pre-filter and activated carbon post-filter in a rugged plastic cabinet.
It is designed to remove dust, tobacco smoke, pollen, bacteria and other
airborne contaminants from the air. In just minutes, you will notice
improvements in your indoor air quality as your Friedrich air cleaner begins
the job of removing the billions of irritating microscopic particles from
your home or office. The activated carbon post-filter also helps eliminate
many objectionable indoor odors.
Carry unit by handle indentations on side panels or carry from base,
as the top removes for filter maintenance and will not support the unit.
Remove the plastic cover from the activated carbon filter, and place
the filter with label facing out.
Make sure the electronic cell is properly placed in the cabinet - airflow
arrow on the end plate should be pointing toward the fan.
Make sure that the top cover is securely in place.
This unit is equipped with a three-prong (grounded) plug for your
protection against shock hazards and should be plugged directly into
a properly grounded three-prong receptacle. DO NOT, UNDER ANY
CIRCUMSTANCES, CUT OR REMOVE THE GROUNDING PRONG
FROM THIS PLUG.
Electronic air cleaners should NOT be placed in any area where
potentially dangerous gasses or vapors exist, nor should they be used
in wet environments.
Pre-Filter
Ionizing Section
of Electronic Cell
Collector
Plates
3-Speed Fan
Carbon Filter
Page 3