Installing Windows - ASROCK AD2550-ITX Manual De Instrucciones

Print Port Header
(25-pin LPT1)
(see p.2 No. 1)
Serial port Header
(9-pin COM1)
(see p.2 No. 2)
2.8 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive first. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom side
to install those required drivers. Therefore, the drivers you install can work properly.

2.9 Installing Windows

If you want to install Windows
below steps.
Using SATA / SATAII HDDs with NCQ function
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY
B. Set the option "SATA Mode" to [AHCI].
STEP 2: Install Windows
Using SATA / SATAII HDDs without NCQ function
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY
B. Set the option "SATA Mode" to [IDE].
STEP 2: Install Windows
18
AFD#
ERROR#
PINIT#
GND
SLIN#
1
SPD7
SPD6
ACK#
SPD5
BUSY
SPD4
SPD3
SPD2
SPD1
SPD0
STB#
®
7 on SATA / SATAII HDDs
®
7 OS on your SATA / SATAII HDDs, please follow
Advanced screen
®
7 OS on your system.
Advanced screen
®
7 OS on your system.
ASRock AD2550-ITX Motherboard
This is an interface for print
port cable that allows
convenient connection of printer
devices.
PE
SLCT
This COM1 header supports a
serial port module.
Storage Configuration.
Storage Configuration.