Installing Windows - ASROCK ALiveNF6P-VSTA Manual Del Usuario

página de 185

/ 185
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

Then you will see these messages,

Please insert a blank

formatted diskette into floppy

drive A:

press any key to start

Please insert a floppy diskette into the floppy drive, and press any key.

The system will start to format the floppy diskette and copy SATA / SATAII

drivers into the floppy diskette.

STEP 2: Set Up BIOS.

Enter BIOS SETUP UTILITY

Set the "SATA Operation Mode" option to [RAID].

STEP 3: Use "RAID Installation Guide" to set RAID configuration.

Before you start to configure RAID function, you need to check the RAID installation

guide in the Support CD for proper configuration. Please refer to the BIOS RAID

installation guide in the following path in the Support CD:

.. \ RAID Installation Guide

STEP 4: Install Windows

your system.

After step1, 2, 3, you can start to install Windows

64-bit OS on your system. At the beginning of Windows

third-party RAID driver. When prompted, insert the SATA / SATAII driver diskette contain-

ing the NVIDIA

RAID driver. After reading the floppy disk, the driver will be presented.

Select the driver to install according to the mode you choose and the OS you install.

NOTE. If you install Windows

HDDs and want to manage (create, convert, delete, or rebuild) RAID functions

on SATA / SATAII HDDs, you still need to set up "SATA Operation Mode" to [RAID] in

BIOS first. Then, please set the RAID configuration by using the Windows RAID

installation guide in the following path in the Support CD:

.. \ RAID Installation Guide

2.13.2