Residual Risks - DeWalt DW033 Manual De Instrucciones

E N G L I S H
WARNING: Hazardous Radiation. Use of controls or adjustments or
performance of procedures other than those specified herein may result in
hazardous radiation exposure.
• Use the laser only with the specifically designated batteries. Use
of any other batteries may create a risk of fire.
• Store idle laser out of reach of children and other untrained per-
sons. Lasers can be dangerous in the hands of untrained users.
• Use only accessories that are recommended by the manufacturer
for your model. Accessories that may be suitable for one laser, may
create a risk of injury when used on another laser.
• Tool service must be performed only by qualified repair person-
nel. Service or maintenance performed by unqualified personnel may
result in injury. To locate your nearest D
56 70 55 or go to www.D WALT.eu
e
• Do not stare into the beam or use optical tools such as a tele-
scope or transit to view the laser beam. Serious eye injury could
result.
• Do not place the laser in a position which may cause anyone to
intentionally or unintentionally stare into the laser beam. Serious
eye injury could result.
• Turn the laser off when it is not in use. Leaving the laser on increas-
es the risk of staring into the laser beam.
• Do not disassemble the laser tool. There are no user serviceable
parts inside.
• Do not modify the laser in any way. Modifying the tool may result in
Hazardous Laser Radiation Exposure.
• Do not operate the laser around children or allow children to
operate the laser.Serious eye injury may result.
• Position the laser securely on a level surface. Damage to the laser or
serious injury could result if the laser falls.
• This tool comes fully assembled. This tool has been designed with
features that allow for quick and easy set-up. Please read and understand
all instructions within the instruction manual prior to use.
•
4
WALT service center Tel: 01753-
e
• An exposure to the beam of a Class 2 laser is considered safe for a
maximum of 0.25 seconds. Eyelid reflexes will normally provide adequate
protection.

Residual Risks

The following risks are inherent to the use of this device:
– injuries caused by staring into laser beam.
LABELING
• Do not remove or deface warning labels. If labels are removed, user or
others may inadvertently expose themselves to radiation.
• The label on your tool may include the following symbols.
V............................. volts
mW ......................... milliwatts
........................ laser warning symbol
nm .......................... wavelength in nanometers
The following pictographs are shown on the tool:
Read the instruction manual before use
Laser warning
Do not stare into the laser beam.
E N G L I S H
5