Publicidad
Idiomas disponibles
Idiomas disponibles
0703 890 X.book Seite 9 Dienstag, 10. März 2009 12:55 12
Check the piston's soft running daily when using the
tool.
Check the saw-blade guide for wear whenever using
the tool, and replace it, if required.
Protect moveable parts and guides with resin-free oil
when not using the tool for longer periods.
If the machine should happen to fail despite the care
taken in manufacture and testing, repair should be
carried out by an authorized customer service agent
for Würth power tools.
For all correspondence and spare parts orders, al-
ways include the article number on the type plate of
the machine.
For the current spare parts list of this machine, log
into the Internet under "http://www.wuerth.com/
partsmanager" or ask for a copy at your nearest
Würth branch office.
Disposal
Power tools, accessories and packaging should be
sorted for environmental-friendly recycling.
Only for EC countries:
Do not dispose of power tools into
household waste!
According to the European Directive
2002/96/EC on waste electrical
and electronic equipment and its in-
corporation into national law, power tools that are
no longer suitable for use must be separately collect-
ed and sent for recovery in an environmental-friend-
ly manner.
Warranty
For this Würth machine, we provide a warranty in
accordance with statutory/country-specific regula-
tions from the date of purchase (proof of purchase
by invoice or delivery note). Damage that has oc-
curred will be corrected by replacement or repair.
Damage caused by normal wear, overloading or
improper handling is excluded from the warranty.
Claims can only be accepted if the power tool is sent
undisassembled to a Würth branch office, your
Würth sales representative or a customer service
agent for Würth compressed-air and power tools.
Noise/vibration information
Measured
EN ISO 15744.
Typically the A-weighted noise levels of the product
are: sound pressure level: 81.4 dB (A); sound power
level: 92.4 dB (A).
Wear ear protection!
The typical weighted acceleration is 24 m/s
Declaration of Conformity
We declare under our sole responsibility that this
product is in conformity with the following standards
or standardization documents: EN ISO 12100 ac-
cording to the provisions of the regulations
98/37/EG (until 28.12.2009) – 2006/42/EG
(as of 29.12.2009).
09
Würth International AG
Aspermontstrasse 1
CH-7004 Chur
SWITZERLAND
G. Rössler
Subject to change without notice
values
determined
according
D. Pennacchio
to
2
.
9
Publicidad
