CHARGING
Power GPS unit Off. Hold [
1.
screen goes blank.
2.
Connect Charger Pins on the charger to
the Charging Ports on the unit.
CHARGING PINS
Note:
Charger Pins and Charging Ports
must be aligned properly (Easiest to align
while looking at back of unit).
3.
Secure Charger Clamp on the charger to
Charger Socket located on opposite side
of unit.
4.
Plug USB cord end into USB port.
5.
When connection is
made, unit will power
on and Battery Icon
bars will pulsate
to indicate charging.
Note:
Battery Icon bars will stop pulsating
when charging is complete. (2-3 hours)
(See unit diagram page 4)
CHARGER CLAMP
] until
POWER
CHARGING PORTS
ENGLISH
3