Sharp DR-P320 Manual Del Usuario página 11

FM tuner Operation
1. Short press Source/Standby to power
on. Short press Source/Standby again to
enter FM tuner mode.
2.
To automatically search for the next/previ-
ous available radio station, press and hold
for 2 seconds the
3. Press and hold Select/Scan button when
in FM mode and it will automatically scan
the frequency range and save presets for
radio stations discovered. To access "preset
recall" press the Stations/Save button.
FM Menu
Press and hold the Info/Menu button while
in FM mode to enter the FM menu. Inside the
menu you can scroll between the following
menu items and functions using the volume
. (Press the Select/Scan button
dial
to confirm a selection. To exit menu items and
or button.
the menu press the Info/Menu button once or
twice until the menus close.):
[Scan setting]: Select the scan sensitivity
(strong stations only or all stations)
[System]:The system menu included sleep,
Alarm, Time, Backlight (brightness), Language,
Factory Reset and SW version options.
Sleep: The sleep function enables you to set
a timer after which the unit will turn itself
into standby mode automatically. The sleep
times included are: Sleep off/15/30/45/60/90
minutes. To cancel the sleep function, select the
Sleep off option.
Alarm: The Alarm timer allows you to configure
2 different alarms.
ū The alarm setup is done through an assisted
process (wizard). To begin choose Alarm
setup 1 or 2, set the: on time, duration,
source, cycle (days), volume and on/off - once
the cycle is complete you will return to the
System menu.
EN