Connecting A Computer; Connecting Devices - Klark Teknik VNET Guia De Inicio Rapido

24
VNET ETHERNET INTERFACE

Connecting a Computer

You can connect your computer to the Ethernet interface in one of two ways:
1. By direct connection from the Ethernet socket of your computer to the Ethernet interface.
2. By connecting your computer to an Ethernet Switch, and from the same switch, or from
another switch on the same network,to the Ethernet interface
1
Computer
VNET
In Link
Ethernet
Ethernet
Interface
2
VNET
In Link
Ethernet
PoE Ethernet
Interface
Devices
VNET
In Link
Power
Supply
Devices
VNET
In Link
Ethernet
Interface
1
VNET
In Link
Ethernet
2
VNET
In Link
Ethernet
PoE Ethernet
Interface
You do not need to worry about IP addressing with this product. It will by default use DHCP,
so your DHCP server will allocate its IP address. If there is no DHCP Server, it will use "zero
config". In either case, it is fully automatic. For more information on this topic, please refer to
your network administrator.

Connecting Devices

For VNET devices, connect the VNET Link socket on the Ethernet Interface to the VNET In socket
of the first device you wish to control, then the VNET Link socket of this device to the VNET
In socket of the next device, and so on. The order in which the devices are connected is not
important. The Link socket of the last device in the 'chain' need not be connected.
Quick Start Guide
Devices
VNET
In Link
Ethernet Power
Interface Supply
Devices
VNET
In Link
Ethernet
Interface
25