N-Gear MOVE WASH LIGHT 7 Manual De Usario página 6

Sound Activated Mode
The unit responds to sounds picked up by the unit in microphone to create a light show . Each sound
picked up makes changes to color shown and position of the effects. This mode enable the unit to act
a Master to other Slave units Choosing Sound Activated To select use the "MODE;ESC"button and
choose "NSTS".When the "ENTER"button is pressed the LED Display changes to"SrUn"and the unit
enters Sound Activated Mode.
Initial LED Display
NSTS
Slave Mode
Up-to 32 units can be daisy chained together with one single unit acting as Master and all other
linked unit as Slaves . Slave unit will all run in synch with the master unit without the need for an
additional controller . connections can be made using standard DMX control cables with Master unit
running in Activated Mode an placed at the start of the chain Choosing Slave Mode To select , use
the MODE/ESC" button and choose "NSTS" When the "ENTER"button is pressed the LED Display
changes to.Son"and the unit will be slave to control signal coming from a Master unit
DMX
9 Channel
Channel
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
CH9
Second LED Display
Srun
Value
0-255
0-255
0-7
8-134
135-239
240-255
0-255
0-255
0-255
0-255
0-255
150-200
Sub-mobe
Sound Activated
Function
Pan
Tilt
OFF
Master Dimmer
Strobe from slow to fast
Open
Red dimmer
Green dimmer
Blue dimmer
White dimmer
XY Speed
Reset