ENGLISH
LOCATION OF CONTROLS
1) DUST COVER
2) DIAL POINTER
3) LEFT SPEAKER
4) PLAY/PAUSE/STOP BUTTON
5) SKIP DOWN BUTTON
6) SOURCE BUTTON
7) RECORD BUTTON
8) POWER OFF/FUNCTIONS SELECTOR
9) VOLUME UP/DOWN CONTROL KNOB
10) 3.5 MM HEADPHONE JACK
11) SD/MMC CARD SLOT
12) USB SOCKET
13) LCD DISPLAY
14) RIGHT SPEAKER
15) SKIP UP BUTTON
16) 10+ BUTTON
17) REPEAT/INTRO/RANDOM BUTTON
18) RADIO BAND SELECTOR
19) TUNING KNOB
20) X-BASS ON/OFF BUTTON
21) POWER LED INDICATOR
22) FM STEREO LED INDICATOR
23) REMOTE SENSOR
24) SPINDLE ADAPTOR
25) TURNTABLE SPEED SELECTOR
26) PICK-UP HOLDER
27) LINE OUT SOCKET
28) FM WIRE ANTENNA
29) AUTO STOP ON/OFF SWITCH
30) AC POWER CORD
CAUTION:
USAGE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULTE IN
HAZARDOUS RADIATION EXPOSURE.
THIS UNIT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE PERSONNEL.
PRECAUTIONS FOR USE
INSTALLATION
• UNPACK ALL PARTS AND REMOVE PROTECTIVE MATERIAL.
• DO NOT CONNECT THE UNIT TO THE MAINS BEFORE CHECKING THE MAINS VOLTAGE AND BEFORE ALL OTHER CONNECTIONS HAVE BEEN
MADE.
• DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE OF SEVERAL CENTIMETERS AROUND THE UNIT FOR VENTILATION.
CONNECTION
1. CONNECT THE POWER CORD (30) TO AC OUTLET
2. SWITCH THE FUNCTION SELECTOR (8) TO " PHONO OR USB/SD " FUNCTION. IF THE BACKLIGHT AT LCD DISPLAY IS LIGHT UP . IT'S MEAN
THE POWER SUPPLY IS NORMAL. NOW YOUR SYSTEM IS READY TO PLAY THE MUSIC.
LISTENING TO RADIO
MANUAL TUNING
1. TURN
FUNCTION SELECTOR (8) TO SELECT " TUNER " MODE.
2. SELECT THE DESIRED BAND BY RADIO BAND SELECTOR (18) (AM OR FM OR FM-STEREO).
3. TUNE TO THE REQUIRED STATION BY TURNING THE TUNING KNOB (19).
4. ADJUST VOLUME KNOB (9) TO THE DESIRE VOLUME LEVEL.
FM & FM-STEREO RECEPTION
• SET THE RADIO BAND SELECTOR (18) AT " FM " POSITION. PROGRAMS ARE RECEIVED IN MONO MODE. IN PARTICULAR WHEN STEREO
SIGNAL ARE WEAK. IT IS PREFERABLE TO RECEIVE THE PROGRAM IN MONO.
8
TT 1062E