Danfoss TP4000 Instrucciones De Instalación página 8

Changing the preset programmes
GB
a) Press PROG until 1st pre-set time and
temperature appears in display.
b) Use + or – buttons to adjust the TIME
(press and hold to change in 10 min
increments).
c) Use Λ or V buttons to adjust the
TEMPERATURE.
d) Press PROG to move to next preset time
& temperature (Event ).
e) Repeat steps b, c & d for programming
Events , , 5 & 6.
Note: Press and hold PROG at any time will
make th unit return to RUN mode.
Running your programme
Press PROG – the colon in the LCD display
will start to flash. The heating will now be
controlled with the programmed times and
temperatures.
User Overrides
Sometimes you may need to change the way
you use your heating temporarily, i.e.due to
unusually cold weather. The TP4000 has several
user overrides, which can be selected without
affecting the thermostat programming.
Altering display to show either time
or actual room temperature
∙ Press + and – together to change
between settings.
8