LEITZ TruSens Z-2000 Manual De Instrucciones página 15

REPLACING UV BULB
1. The indicator will glow red when it is time to
replace the UV bulb.
2. Remove HEPA filter drum (Fig. A), and use a
screwdriver to remove the screw securing the UV
housing (Fig. I).
3. Gently remove the UV housing (Fig. J) and
disconnect the UV bulb from the socket (Fig. K).
Note: Upon replacement of the UV-C emitter please dispose of at your local WEEE collection facility.
Fig. I
Fig. L
4. Release carriage from the UV bulb (Fig. L).
5. Secure carriage to new UV bulb (on page 12)
6. Replace the UV housing and use a screwdriver to
7. Once the purifier is powered-on, hold the Reset
button until the
Fig. J
Fig. M
(Fig. M) and connect UV bulb into purifier (Fig N).
tighten the fastening screw.
indicator turns white.
Fig. K
Fig. N
15